STBB is a ventilated electronic Assman psychrometer which measures the air temperature and humidity with the dry and wet bulbs method. Typical applications: agriculture, research, meteorology...

The SPM10-2.5-1 sensor allow to get an indicative measurement of the PM10, PM2.5 and PM1 fine dust present in the air; they are equipped with a laser scattering sensitive element and is available with 4… 20mA outputs. SPM10-2,5-1 is suitable for measurements in various applications: earth moving, cement works, environmental, ...

The SFON sensors detect an indicative noise measurement to activate any alarms in case of exceeding the warning thresholds; the sensor is available with 4...20mA output and is suitable for measurements in various applications: construction sites, working environments, environmental measurements, ...

RPS1 is a sensor for measuring the presence of rain or snow. It is equipped with a heater that keeps the transducer dry, avoiding false signals due to fog or condensation. RPS1 has an ON/OFF relay output and a 4-20mA analog output proportional to the percentage of wetted surface ....

Noise, dust and wind monitoring&alarm system

MicroVen1 is a datalogger for micro and mini wind applications tested at a Measnet center, compliant with IEC61400-12. It works with 2 AA batteries recharged by a solar cell and can connect n.2 anemometers, n.2 wind vane and n.1 thermometer. Minimum cost....

MeteoGraph is a web application for the numerical and graphic display of data transmitted via GPRS on FTP area from environmental monitoring stations with Geoves datalogger...

LPDL multichannel dataloggers have been designed for meteorological and environmental monitoring and for climatological alarm (floods, storms, forest fires, strong winds, etc ...). The meteorological data are managed in compliance with the WMO and the main regulations in force...

ACC-3AX-200 triaxial accelerometers are MEMS vibration sensors which work inside 200Hz bandwidth and have ±2g (o ±6g) measurement range. ACC-3AX-200 has 3 stand-alone 4-20mA analog outputs, one for every axis x-y-z, which allow to connect them to the most common acquisition units available in the market. Typical applications: structural monitoring, wind turbines, geology, ...